Is Technology Making Double Glazing Door Lock Repairs Better Or Worse?
Is Technology Making Double Glazing Door Lock Repairs Better Or Worse?
Blog Article
Double Glazing Door Lock Repairs
Have your uPVC window or door mechanism started to fail? Perhaps the handles on your uPVC windows or doors aren't aligned correctly or are difficult to use.
It is crucial that your double glazed doors work smoothly, otherwise you'll be wasting energy and increase the chances of burglary. Owen the Locksmith can fix your door lock at an affordable cost.
Snapped Key
When a key snaps off in a lock, it could be incredibly difficult. It could also be a security problem in that it can leave you vulnerable to an intruder if the door is not locked. There are a few quick fixes you can make to repair the issue and make your door work again.
Keep calm. If you get scared and start playing around with your keys you may end up pushing the broken piece of the key deeper into the lock, making the situation worse.
Spray WD-40, or another penetrating lubricant, into the lock. This will assist the broken piece to be removed more easily. You can also use a screwdriver to help break pieces that could be blocking the way. If you're lucky enough to have a little bit of the key hanging out, you can use a paperclip or some other thin metal object to grab it and then pull it out. Both of these methods work well, however, be careful not to push the damaged piece of the key deeper into the keyway.
Some paperclips have grooved edges that could serve to extract hooks, and some Jigsaw blades also work for this use. If you don't have any of these then you can bend a hook using needle-nosed pliers. Finally, a pair of tweezers can be used to grasp and pull out the remaining bit of the broken key.
If you cannot remove the broken piece of key then you can use a lock deicer. It is available in most hardware stores and works by freezing any moisture that may be present within the lock.
If none of these solutions seem to work, it could be time to contact a locksmith. Fitlocks specialists are able to quickly resolve issues with uPVC door mechanisms and locks, including snapped keys and broken handles. They can also reconfigure double glazing door mechanisms so that they are easier to operate. Get a double glazing repair via our website or give us a call to discuss your requirements.
Broken Cylinder
A broken cylinder is an immediate security risk. A locksmith professional can fix the cylinder. A locksmith will have to tap the cylinder to fix it. This can be accomplished with a hammer or other tool. However, the most effective method is to use a wire or a long match. The match or wire end near the keyway. The locksmith will then strike the lock in order to break it. This is more secure than using a hammer that could cause damage to the lock.
The most common cause of cracks in the head of a cylinder is due to overheating. This can happen when the cylinder block as well as the cylinder head are made from different metals, like cast iron and aluminium. When the different metals are heated and cool at different rates, it may create hotspots locally that expand faster than the rest of the head of the cylinder, leading to cracks.
Corrosion is a different cause of cylinder fractures. If the cylinder head and the cylinder block aren't properly maintained, this can lead to rusting or corrosion, which may cause them to expand at a greater rates than they should. As time passes, this may also lead to cracks.
If your uPVC window or door lock is stiff and requires a lot of pressure to turn it could be due to a variety of causes. This can be caused by a malfunctioning locking mechanism or misalignment as well as a worn-out handle.
Fortunately it is a simple and cost-effective fix for the majority of double glazing owners. A professional locksmith will typically be able to solve this issue within a matter of hours after arriving at your residence. They can repair the locking mechanisms, or replace the window handles, and also change the gearboxes, based on your specific needs. A professional locksmith will always be able to advise you on the most cost-effective solution for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders which give you an extra security layer from burglars. This is a small price to pay for the peace of mind that comes from knowing that your uPVC doors are safe.
Broken Handle
Window handle locks have intricate mechanisms that deteriorate as time passes and usage, so it's no surprise that they sometimes break. If yours fails it's difficult to identify the cause of the issue and make sure that you repair it correctly.
If the issue is with the internal locking mechanism or the latch, repairing your broken handle can improve your uPVC double glazing door's security as well as help you stop draughts. It could be costly to replace or repair the handle in a way that isn't done correctly. It could also harm the frame and the lock of your door.
Screwdriver: With the window open and the screw loose, loosen the handle. The screw should be on the inside of the back plate, normally concealed by an aesthetically pleasing cover for the screw reasons. It is important to not lose any internal parts of the handle like the plates and levers on either side. It is best double glazing repairs near me to keep them in the double glazed windows near me same order so you can replace them again in the event of a need.
Next, turn the handle to make it 90 degrees to the window frame and loosen the screw on the back of the handle which holds it to the internal spindle by using a second screwdriver. Once the screw is free, you can pull the handle out and remove the broken spindle. Replace it with a new one, making sure it's the same length as the old one (you can typically find these online or in hardware stores) and securely screw it into the right place. Be cautious not to overtighten as this could cause damage to the handle or the window frame.
Ensure the new handle is correctly installed Close the window and test the handle. Hopefully, it will work smoothly and you'll be able open your window again.
While you're working on the handle, make sure to make sure your uPVC windows are shut correctly. If they don't close properly, you may experience damp or draughts in your home. It could also affect the energy efficiency of your home. Core Sash Windows is a local window company that can adjust the hinges of your window frames to ensure that they shut properly.
Broken Spindle
It is often the case that the spindle in the handle breaks, rather than the handle itself. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle to operate an electronic locking mechanism within the window frame. The handle is connected to a central rod which in turn activates mushroom-like locking cams, these locks are inserted into the window frame. If the dead latch mechanism fails to open when the handle is turned, it is most likely the spindle is more info broken. This could be a problem that is frustrating.
Luckily, there are steps that can be taken to rectify this issue. A reputable locksmith can quickly and effectively fix this problem. They will be able to disassemble the window handle by using a tool to remove the wheel component of the mechanism where the spindle goes. This is done without damaging the handle or causing any other damage to the frame of the window.
After removing the double glazing repairs near me wheel, the technician will inspect the spindle and identify the reason for its break. This involves breaking the spindle into its component parts and carefully recording their general condition, as well as any specific areas of more info damage or excessive wear. This procedure is typically carried out by technicians in a clean and safe environment.
Then, clean the damaged spindle. This will remove any dirt or other debris that could be hindering it from operating normally. Following this the spindle is cleaned, it can be repaired or replaced. If the technician is replacing the spindle, it is possible to use a dowel that is comparable in size to the original. He will then drill holes that are identical to both pieces. This will ensure that the new spindle has a precise fit with the handle.
If the damaged spindle can't be repaired, it could require replacement. Home centers offer generic replacements, but if the design of your window is unique then you will need to find a woodworker or cabinet maker who can duplicate the exact component for you. Once the new spindle has been installed it can be fitted to the handle by lining up the screw holes on the handle with the frame's existing screws. Once the new handle is firmly installed, you are now ready to operate your uPVC window.